Water and fertilizer barrels
Water tank CV-1,2
The water tank CV-1.2 is a practical reservoir for transporting and storing water in agriculture, at construction sites, or in field conditions. The volume of 1.2 m³ allows for supplying water to several working areas simultaneously. The sturdy construction is resistant to loads, prevents contamination and maintains water quality. Thanks to convenient mounting, the tank is easily installed on a tractor or trailer. This is an effective solution for providing water to machinery, animals and workers anywhere.
Characteristic:
|
Mark |
CV-1.2 |
|
Volume,m3 |
1,2 |
|
Metal thickness, mm |
3 |
|
Number of axes |
1 |
|
Pendant |
spring |
|
The size of the wheels |
14/65 R16 |
|
Total weight, kg |
2 800 |
|
Overall dimensions, mm – length – width – height |
3 580
1 765 2 000 |
|
Required tractor power, hp |
34 |
How it works:
Trailer tank CV-1,2 is a convenient means for transportation and storage of drinking water in the field. It consists of a tank (barrel) mounted on a single-axle trailer with a pump and a set of hoses for water intake and supply (bottling) from the tank. This design provides convenience and mobility in the movement of water.
The tanker is mounted on a single-axle trailer chassis, which allows transportation on public roads and off-road by off-road trucks (such as GAZ-66, ZIL-131, Ural-4320, KrAZ 5233, etc.). Travel speed is no more than 60 km/h.
For easy connection to a towing vehicle, the trailed tanker CV-1.2 is equipped with a replaceable drawbar coupling device:
- towing eyelet with a diameter of 90 mm (installed);
- locking hitch for a ball with a diameter of 50 mm (optional)
Complete set of the Central heating system 1.2
- Single-section tank, thickness 3 mm, volume 1.2m3, outside – steel, inside – stainless steel AISI304
- Filler neck is thermally insulated with one/two waveguards (thermal insulation material – 50 mm thick polyurethane foam)
- Tank dimensions DхL – 1200 х 895 х 1895 mm
- Dimensions of the semitrailer with a tank are 3580 х 1765 х 2000 mm
- Spring suspension
- Axle 60×1700 – 1 pc
- Ground clearance of at least 300 mm.
- Wheels 14-65 R16 – 2 pcs + 1 spare
- Access hatch 500 mm: rubber-sealed at the top, clamped with four clamps.
- The drain valve is located in the lower part of the tank
- 12(24)V lighting for light signaling during transportation
- Toolbox for spare parts and accessories
- Anti-roll bar – 2 pcs (for each wheel)
- Pump BCF-4 (for pumping and supplying water from the tank)
- Ball valve (for collecting water from the tank)
- PVC hose 4 m. diameter 50 mm
- Mechanical support of the drawbar (hand jack)
- The color of painting is agreed with the customer according to RAL
