Solvent filling stations
Solution and filling station RZS-16 multilift
The RZS-16 Multilift Solution Filling Station is a universal solution for preparing, mixing, and delivering liquid fertilizers and pesticides. Its large volume, hydraulic pump, washing system, and meter ensure accurate and safe operation. The mobile multilift platform allows installation on any chassis with a hook loader system, speeds up the filling of sprayers, reduces downtime, and increases productivity in the field.
Characteristic:
| Main characteristics | RZS-16 multi-lift |
| Number of sections, pcs. | 3 |
| Metal thickness, mm | 4 |
| Application | working solution |
| Volume,m3 | 1+7,5+7,5 |
| Diameter, mm | 1 900 |
How it works:
Stainless steel tank for preparation, transportation and filling of crop protection products.
It is made on the basis of a multi-lift platform, with a metal subframe and rollers in the rear of the tank. It is installed on the chassis of all vehicles with a hook loader system. It operates from its own oil station (gasoline), which is included in the basic configuration.
The 16m3 tank, 1900 mm in diameter, is divided into three parts by two blank partitions:
- two sections for working fluid (7.5 m3 each);
- one section for clean water (1m3 ) – for washing the first and second working sections of the barrel.
The frame is reinforced, made of black metal, painted with two-component polymer paint.
Functions of fuel dispensing stations:
- pumping water into the compartment through the meter;
- injection of chemicals through a chemical mixer;
- agitation (movement) of the working solution;
- pumping out the working solution through the meter;
- dissolution of mineral fertilizers;
- rinsing the compartment after pumping out the working solution
- refueling sprayers in 5-7 minutes.
The RZS-16 multilift solution preparation system consists of:
- chemical mixer (100 liters);
- a counter for counting the amount of fluid pumped in and out;
- a hydraulically operated pump that allows filling the tank and sprayer alternately from each tank;
- two vane pumps (one for each working section), which ensure the preparation of the working solution, agitation and flushing of the tank;
- a water intake valve for pumping in and out water.
For washing, two injection washers were used for each working tank separately. For agitation, 4 anti-foam hydraulic mixers were used for each working tank.
Complete set of the RZS-16 multilift filling station.
Tanks for solution 7500 + 7500 liters, for clean water 1000 liters, chemical mixer 100 liters, flow meter Ø3″ Arag, Ø3″ piping, 2 pumps (one for each working section), hydraulic pump, oil station.
