Equipment for storing grain in bags
Grain bagging machine ZPM-180PM
Weight, kg 1990
Productivity, t/h 180
Tractor power, hp 100
Consultation
ZPM-180PM is a modern machine for fast grain bagging with a uniform material flow. The lowered intake hopper simplifies loading, while the additional hydraulic extendable auger speeds up the bagging process. The tractor PTO drive ensures reliable and economical operation. This is a cost-effective solution for farms seeking stability and high productivity.
Characteristic:
| Characteristics | ZPM-180pm |
| Unladen weight, kg | 1 990 |
| Productivity, t/h | 180 |
| Sleeve (bag) diameter, mm | 2 700 |
| Working dimensions | |
| – length, mm | 4 830 |
| – width, mm | 5 330 |
| – height, mm | 2 800 |
| Hopper size, m | 1,5х3,0 |
| Required tractor power, hp | 100 |
How it works:
Grain is poured into the upper receiving hopper (or an additional lower hopper), which is fed by augers into a plastic bag, the auger is driven by the tractor’s 100 hp PTO through a gearbox.
A new product from Kobzarenko Plant is the ZPM-180pm grain packing machine with a lowered intake hopper and an additional hydraulic extendable auger for grain packing installed on the side. Grain can be fed using a storage hopper, a bucket with a front loader or any trailer or vehicle with rear unloading.
Complete set of ZPM-180PM:
- Chassis: single-axle unit without springs;
- 10.0/75-15.3 wheels – 2 pcs;
- anti-corrosion coating with polymer paint;
- The diameter of the discharge auger is 400 mm;
- diameter of the side auger 300 mm – height of the receiving hopper 1040 mm;
- The main auger is driven by the tractor’s PTO, and the side auger is driven by the tractor’s hydraulic system via a hydraulic motor;
- hinge diameter 40(50) mm, with mechanical support of the drawbar;
- drum brake system with mechanical screw drive;
- separate wheel braking;
- PTO shaft included.
