Chaser bins
Chaser bin PBN-30
The PBN-30 grain transfer hopper is a reliable and high-performance grain cart with a 30 m³ capacity and a payload of over 21 tons, designed for continuous field operation with combine harvesters. It is compatible with 180–220 hp tractors and significantly reduces equipment downtime by quickly receiving grain without stopping and efficiently transferring it to transport vehicles or storage. This optimizes harvesting logistics and increases overall farm productivity.
Characteristic:
|
Name |
PBN-30 |
PBN-30 |
|
Axes, pcs |
2 |
2 |
|
Gross weight, kg |
28 200 |
29 700 |
|
Semitrailer weight, kg |
6 900 |
7 200 |
|
Load capacity, kg |
21 300 |
22 500 |
|
Load on the drawbar, kg |
3 020 |
3 020 |
|
Semitrailer length, mm |
8 500 |
8 500 |
|
Semitrailer height, mm |
3 480 |
3 900 |
|
Semitrailer width, mm |
2 460 |
3 000 |
|
Hitching loop height, mm |
520 |
520 |
|
Body volume,m3 |
28 |
30 |
|
Screw diameter, mm |
520 |
520 |
| Unloading height, mm |
4 300 |
4 300 |
|
Unloading speed, t/min – at 540 rpm – at 1000 rpm |
6 12 |
6 12 |
|
Decomposable |
hydraulically |
hydraulically |
|
Aggregated with a tractor, hp |
180-220 |
180-220 |
|
Tires |
560/60 R 22,5 650/50 R 22,5 650/55 R 26,5 |
560/60 R 22,5 650/50 R 22,5 710/50 R 26,5 |
|
Maximum speed, km/h |
30 |
30 |
|
Brake system |
Pneumatic |
Pneumatic |
How it works:
Welcome to the website of our grain harvesting equipment – the PBN-30 model hopper reloader! This device makes the harvesting process even more efficient and simple. Easily connect it to the tractor and work together with the combine in the field. The combine harvester’s hopper is about 15m3 and, as it fills, the grain is unloaded into the reloader hopper without stopping. The combine in such a chain works without stopping and can process an additional 10-14 hectares per day, increasing the productivity of your farm. In addition, the reloading hopper transfers grain to grain trucks waiting at the edge of the field, reducing delay time and ensuring a more efficient process. Choose our reloading hopper and make your grain harvesting process even easier and more efficient!
Complete set of PNB-30
- Two-axle tandem on leaf springs with jet rods, 130×2300 solid axle
- Tires size 560x60R22.5 (load 7.2 tons at 30 km/h)
- Pneumatic brake system (possibly hydraulic, mixed)
- V-30 cubic meter body, payload 22,5 tons
- Discharge auger Ø 520 mm, discharge height 4.3 m.
- Replaceable trailer ring Ø 40, 50 or 90 mm Scharmuller (Austria)
- Hydraulic support for the drawbar
- S2100 drive reducer manufactured by Bondiolia Pavesi, Italy
- Driveshaft with trim bolt
- Screw guard
- Solid rolled screw spiral, thickness 8/4 mm, manufactured by Flitech Srl. (Italy)
- A ladder for maintenance
- Horizontal auger cleaning mechanism
- awning system (basic for Ukraine)
- hydraulically adjustable auger canopy (standard for Ukraine)
Use of a grain bin during harvesting.
During the harvest, this tractor is used as a storage hopper. It takes grain away from the combine and transfers it to trucks or other vehicles. The use of PBN-30 makes it possible to reduce the vehicle fleet and reduce its downtime and the downtime of the combine. The efficiency of using the PBN-30 increases with large distances between the field and the current (elevator). Another advantage of a reloading semitrailer over a car is that the tractor has greater cross-country ability on a wet field.
Using a reloading semitrailer during the sowing season.
Each wide-cutting seeder has its own loading auger, but it stands under loading for 30-40 minutes, due to the low productivity of this auger, and sowing is always a hot time, every minute is worth its weight in gold.
“Kobzarenko Plant” offers a reloading hopper storage tank PBN-30, which will reduce the downtime of the seeder, its capacity is 3 tons per minute It takes no more than five minutes to load such a seeder PBN-30. The use of a semi-trailer saves you up to 20-30 minutes at each refueling of the seeder.
Using a tractor semi-trailer to load mineral fertilizers.
With a capacity of 3 tons per minute, the PBN-30 hopper will quickly load any fertilizer spreader. For example, let’s take a 12-ton spreader MVU-12, and it will take no more than 6-7 minutes for the semitrailer to load it, but this is provided that the fertilizer is well-flowing and not caked. This semitrailer will not overload stale, stony fertilizers. After using the PBN-30 for loading fertilizers, the semitrailer must be thoroughly cleaned of mineral fertilizer residues to extend its service life. It is strictly forbidden to store mineral fertilizers in it, which, when moisture gets in, react with the metal and corrode it.
