Chaser bins
Chaser bin PBN-16
The PBN-16 Kobzarenko loader is a powerful and efficient solution for field work, which significantly increases the productivity of the grain harvesting campaign. With a body volume of 16 m³ and a load capacity of over 11,250 kg, it is easily aggregated with a tractor with a power of 120 hp or more, follows the combine and receives grain on the go, which allows the machine to work without stopping and process significantly more hectares per day. Loaded grain can be quickly reloaded into trucks right in the field, optimizing logistics and reducing combine and transport downtime. Such integration with farm machinery allows you to maximize the potential of the most powerful combines and significantly reduce harvesting time.
Characteristic:
|
Gross weight, kg |
16 000 |
|
Semitrailer weight kg |
4 750 |
|
Load capacity kg |
11 250 |
|
Load on the drawbar, kg |
1 800 |
|
Semitrailer length, mm |
7 070 |
|
Semitrailer height, mm |
3 450 |
|
Semitrailer width, mm |
2 480 |
|
Volume,m3 |
16 |
|
Diameter of the discharge auger, mm |
420 |
|
Unloading height, mm |
4 300 |
|
Unloading speed, t/min. – at 540 rpm – at 1000 rpm |
3 6 |
|
Drawbar support |
hydraulic |
|
Aggregated with a tractor, hp |
120 |
|
Tires |
425-70 R18 500/50-22,5 |
|
Maximum speed, km/h |
30 |
|
Brake system |
pneumatic |
How it works:
We offer a hopper reloader – the best solution for harvesting grain in the field. This reloader is easily connected to the tractor (via a PTO shaft) and follows the combine to take in the harvest immediately. The combine can work without stopping, as the reloader hopper takes the grain from the combine on the go. The reloading hopper then transfers the grain to grain trucks waiting at the edge of the field, so the combine can process an additional 10-14 hectares per day. The use of the PBN-16 reloading hopper allows you to optimize the potential of the most powerful combine harvesters.
Complete set of PBN-16
- Two-axle tandem on leaf springs, 90×2100 brake axles
- Tires size 425-70 R18 load 3.87 tons at 30 km/h
- Pneumatic brake system (possibly hydraulic, mixed)
- V-16 cubic meter body, 12 tons payload, 2.90 m loading height
- Discharge auger Ø 420 mm, discharge height 4.3 m.
- S2100 drive reducer manufactured by Bondiolia Pavesi, Italy
- Hydraulic support for the drawbar
- Replaceable trailer ring Ø 40, 50 or 90 mm Scharmuller (Austria)
- Horizontal auger cleaning mechanism
Overall body dimensions LxWxH – 4 800 x 2 480 x 2 550 mm
Overall dimensions of the semitrailer LxWxH – 7 070 х 2 480(2 530) х 3 450 mm
Homologation: Unloading height – 4490 (4965) mm
Completeness:
- two anti-roll bars;
- ladder;
- four hydraulic euro connectors;
- an electric cable with a socket;
- pneumatic cable to the tractor;
- electrical equipment.
- PTO shaft with safety clutch (trim bolt)
- awning system (basic for Ukraine)
- hydraulically adjustable auger canopy (standard for Ukraine)
Use of a semitrailer during harvesting
During harvesting, this semitrailer is used as a storage hopper. It takes grain from the combine and transfers it to trucks or other vehicles. The use of PBN-16 makes it possible to reduce the vehicle fleet and reduce its downtime and the downtime of the combine. The efficiency of using the PBN-16 increases with large distances between the field and the current (elevator). Another advantage of the reloading semitrailer over the car is that the tractor has greater cross-country ability on a wet field. Given that precipitation often falls during harvest, this advantage is significant.
The use of a semi-trailer during the sowing season
Each wide-cutting seeder has its own loading auger, but it stands under loading for 30-40 minutes, due to the low productivity of this auger, and sowing is always a hot time, every minute is worth its weight in gold.
“Kobzarenko Plant offers a PBN-16 reloading semitrailer that will reduce the downtime of the seeder, its capacity is 3 tons per minute It takes no more than five minutes to load such a PBN-16 seeder. The use of a semi-trailer saves you up to 20-30 minutes at each refueling of the seeder.
Use of a semi-trailer for loading mineral fertilizers
With a capacity of 3 tons per minute, the PBN-16 semitrailer will quickly load any fertilizer spreader. For example, let’s take a 12-ton MVU-12 fertilizer spreader, and the semitrailer will take no more than 6-7 minutes to load it, but this is provided that the fertilizer is well-flowing and not caked. This semitrailer will not overload stale, stony fertilizers. After using the PBN-16 for loading fertilizers, the semitrailer must be thoroughly cleaned of mineral fertilizer residues to extend its service life. It is strictly forbidden to store mineral fertilizers in it, which, when moisture gets in, react with the metal and corrode it.
Finding the perfect hopper for your farm is our priority! Depending on the needs and characteristics of your site, we can offer the best solutions. Our experts will be happy to help you determine the optimal volume and functionality of your hopper. Contact us to ensure the most efficient harvesting!
